Product Manual

Thank you very much for choosing a Roughneck® Product! For future reference, please
complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine is not modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted
distributor to determine if it can or should be performed on the product.
For technical questions, please call 1-800-222-5381.
WARNING: Read carefully and understand all INSTRUCTIONS before operating.
Failure to follow the safety rules and other basic safety precautions may result in
serious personal injury.
Save these instructions in a safe place and on hand so that they can be read when required.
Keep these instructions to assist in future servicing.
INTRODUCTION
The diaphragm pump offers high volume delivery even at low air pressure.
Air-operated double diaphragm pumps utilize a pressure differential in the air chambers to alternately
create suction and positive fluid pressure in the fluid chambers, ball check insure a positive flow of fluid.
Pump cycling will begin as air pressure is applied and it will continue to pump and keep up with
the demand. It will build and maintain line pressure and will stop cycling once maximum line
pressure is reached (dispensing device closed) and will resume pumping as needed.
TECHNICAL INFORMATION
DIMENSIONAL DATA (UNIT: MM)
MODEL: 41763
AIR-OPERATED DOUBLE DIAPHRAGM PUMP
OWNER’S MANUAL
OIL DISPENSING SYSTEMS OWNER’S MANUAL
Item#s 41763 & 41769
Item# 41763
Item# 41769
1 of 7
WARNING: Read carefully and understand all INSTRUCTIONS before
operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Model
Inlet/Outlet
Air Inlet
Flow Rate
Max. Air Inlet Pressure
Max. Outlet Pressure
Max. Diameter Solid
Membrane
41763
1/2"
1/4"
12GPM
115PSI
115PSI
1/8"
Nitrile
41769
1"
1/4"
24GPM
115PSI
115PSI
1/8"
Nitrile
150
182
9
295
232

Summary of content (4 pages)