Product Manual

Page 10 of 15
Operating Instructions
⚠WARNING
 If swallowed, do not induce vomiting, call physician immediately.
 Avoid prolonged breathing of vapors.
 Do not syphon by mouth.
 Always wear the proper protective equipment including ANSI Z87.1 compliant eye protection and
heavy duty work gloves.
 Fill slowly to prevent the build-up of static charges.
 If fire starts, do not remove nozzle. Back away immediately.
 Closely monitor flow to prevent spills and overflow.
 Keep nozzle in contact with the container while filling. Do not use a nozzle lock-open device.
 Use cart for “one type of fuel only” to avoid possible contamination or damage to equipment or
motor vehicles. Do not use this container for gasoline or other flammable liquids.
 Place caddy on firm, level, stable ground before use. Do not attempt fuel transfer if caddy is stable
or on an inclined surface.
 Drain all fuel from hose and pump back into tank by lifting the hose end above the pump and
turning the pump handle counter-clockwise.
 Never leave unit unattended while operating.
1. Attach green ground wire clamp to a known ground point on the vehicle being serviced.
2. Place the hose in the vehicle.
3. Rotate the pump handle to begin the transfer. Pump will self-prime.
4. Rotate the handle clockwise (as shown by arrow on the pump) to dispense from the fuel caddy,
rotate counter-clockwise to transfer fuel into the caddy.
5. The fuel caddy may also be filled by removing the fill cap and filling through the fill tube. DO
NOT OVERFILL. Fuel level must be below the flame arrestor screen under the fill tube.
After Each Use
⚠WARNING
 Keep out of reach of children
 Store in well-ventilated area.
 Do not store in vehicle or living space.
 Do not store near heat spark or flame.
 Do not store in direct sunlight.