Product Manual

8 of 16
Main Parts of Product
Assembly Instructions
1. Tightly screw the suction pipe into the inlet coupling of the pumping unit. Extend the suction pipe
into the truck tank or barrel to within 3" of the tank’s bottom.
2. Screw the inlet coupling of the pump into 2" of the tank or barrel opening. The inlet coupling must
be completely and securely threaded into an undamaged tank or barrel bung.
3. During installation and maintenance, make sure that the electric supply lines are not live.
4. Always turn off the switch before supplying electrical power.
5. Check the correct rotation direction of the DC pump. If it is inverted, check the polarity of the
connection cable.
a) BLACK cable: positive pole (+)
b) WHITE cable: negative pole (-)
6. Systems should be designed to require a minimum amount of suction lift. Maximum “equivalent
feet of lift” is 8’ for diesel fuel.
7. The tank or barrel must be properly vented. A water separator should be used for pumping diesel
fuel.
8. DC Electrical