Product Manual

Page 3 of 6
3
SPECIFIC OPERATION WARNINGS
 Do not deliver corrosive or flammable liquids.
 Do not expose the tank to heat sources.
 Do not do welding on the vessel only use the appliance for its intended purpose.
OPERATING CONDITIONS
1. Remove cap B and fill the reservoir (4/5 its capacity) with oil, using the funnel supplied.
2. Secure cap B. Close ball valve A. Connect compressed air to quick couple D, open the ball valve E until
manometer F gives a pressure of 3-8 bar (45 – 115 PSI).
3. To deliver oil, open ball valve A. Open gun set G by it counter clockwise.
WARNING:
Before opening the cap B, always discharge the reservoir compressed air by opening ball valve E.