Manualshelf

Product Manual

ManualsBrandsRoughneck Logging ManualsLog Skidding + LiftingRoughneck Log Lifting Tongs — 36in. Diameter, 3,300-Lb. Capacity
12345678910
Page 6 of 12
the tool itself.
Keep guards in place and in working order. Never operate the tongs without the guards in place.
Specific Operation Warnings
⚠WARNING
Do not exceed the rated load capacity.
Do not stand under or near while load is suspended.
Assembly Instructions
Step 1
Assemble the connected plate (#5) into the tong body (#1) with (#6, #7) the bolts and lock nuts. Be
sure they are fastened.
Step 2
Insert the axle (#4) by passing it through the receiver (#10), the 4 piece plates (#5), the 3 piece tubes
(#3), the swivel grab (#2), and the flat washer (#11). Lastly, insert the linch pin (#8).