Owner's manual

Dokument

IMA 210

Rev

Page

3 (6)

Electrical connections

The power supply has to be connected to and . is considered as

system ground. If the analogue output is connected to a controller the same ground

reference has to be used for the CF8-W-Disp-AL unit and for the control system!

Unless different transformers are used, special precautions need to be taken.

PLEASE NOTE! The CF8-W-Disp-AL signal and

power supply grounds are common.

PLEASE NOTE! The same ground reference

has to be used for the CF8-W-Disp-AL unit and

for the control system!

If possible keep the sensor powered up after mounting. Connect the analogue output

before measuring.