Quick Start Guide
Table Of Contents
- To use the 3D printing module, please read the corresponding guide.
- Tools & Accessories Cables & Power Adapter
- Pneumatic Kit
- Before You Start
- Robot Arm Coordinate System
- Y
- Ports
- 1 2 3
- External Motor Port
- USB-C Ports
- Setup Pen Holder Module
- Connect to power socket to power on and connect to computer
- Use Pen Holder Module
- Start drawing
- Adjust pen height
- Open Rotrics Studio and click Basic
- Start Drawing
- Generate G-code
- Laser Engraving
- Transform into a Laser Engraver
- Prepare for Laser Engraving
- Start Engraving
- Transform into a Laser Engraver
- Prepare for Laser Engraving
- Place the material
- Focus Laser Engraver
- Open Rotrics Studio and set the focal height at the basic panel
- Start Engraving
- Please refer to our online manual for more details: manual.rotrics.com
- Generate G-code
- Picking and Placing
- Transform into a Air-Picker
- Start Picking and Placing
- Attach the universal pneumatic connector to the pneumatic module.
- Suction Cup Pneumatic Module
- Attach the Suction Cup Connector to the Pneumatic Module
- Attach Suction Cup
- Soft Gripper Pneumatic Module
- Start Picking and Placing
- Please refer to our online manual for more details: manual.rotrics.com
- Open Rotrics Studio and record movements
- Generate G-code and start picking
- Support
Suction Cup Connector x 1
Luftpumpen-Saugstab | Tige d'aspiration de la
pompe à air | Varilla de succión de la bomba de
aire |
气泵吸杆
|
吸盤コネクター
|
공기 펌프 빨대
Hex Nut for Suction Cup Connector x2
Luftpumpe Saugstabmutter | Écrou de tige de
pompe à air | Tuerca de la varilla de la bomba de
aire | 气泵吸杆螺母 | 吸盤コネクター用ナット | 공기
펌프 빨대 너트
Air Valve Connector x 6
Luftventilanschluss | Connecteur de vanne |
Conector de la válvula |
气阀接头
|
エアーバルブコ
ネクター | 에어 밸브 조인트
Soft Gripper Connector x 3
Flexible Klauengelenke | Joint de griff e flexible |
Conector de garra flexible |
柔性爪接头
|
ソフトグリ
ップコネクター | 유연한 손톱 이음
Screw for Gripper Connector x 3
Flexible Klauensteckermutter | Écrou de
connecteur à griff e flexible | Tuerca de conector
de garra flexible |
柔性爪连接器螺母
|
ソフトグリッ
プコネクター用ナット | 유연한 손톱 커넥터 너트
M2.5 Socket Cap Screws x 4
Innere sechseckige Schrauben | Boulon à tête
hexagonale | Tornillo de cabeza hueca
hexagonal | 内六角螺栓 | M2.5 ネジ | 렌치 볼트
4