User Guide

20-5110 Issue B 9
The Setup Menus
Next Enter
Behind the Front Panel
The instrument uses a single level menu structure. The menu system lists
parameters (eg. inPt, unit, dP, etc.), each of which leads to a list of
configurable instrument options (eg. the parameter inPt leads to the
options mV, mA, VoLt etc.).
To enter the setup menus:
1. Remove the front cover by pushing the extraction tool into the gap
below the bezel and then pulling the tool forward to unclip the bezel
as shown in the diagram below.
Removing the Bezel with the Extraction Tool
Sentry Digital Panel Indicator
Setup Guide