User Guide

4
INSTALLATION AND MOUNTING - 2” pipe or post mounting
Ideally the site chosen should be free from dust, corrosive fumes, vibration and extremes of temperature.
The instrument is suitably designed for outdoor weather conditions and protected against ingress of dust and water.
The recorder is suitable for mounting onto a 60mm outside diameter post or pipe having a 2" nominal bore using the 'U' bolts
provided.
Refer to figure 1 for overall dimensions of the recorder and general installation.
The post or pipe may be vertical or horizontal to the recorder but the recorder must be installed vertically.
Clearscan™ Recorder Series - Operating and Service Manual
CASE BREATHER
53
56
3
7
1
41
114
4
4
90
65
116
6
302
42
0
4
83
PRE
SSU
RE
CO
NNE
C
TI
ON
1
/
2" NPT
S
TANDAR
D
60
mm
O/
D PIPE
O
R P
OST
Fig. 1b Outline Dimensions for 12 inch chart recorder (2” pipe / post mounting)
all dimensions are in mm