User Guide

8
INTERNAL FEATURES
Clearscan™ Recorder Series - Operating and Service Manual
Blue
Fig. 2 Internal Features (with chart plate in place)
RECORDER START-UP CHECK
Before putting the recorder into operation make the following checks to ascertain that it is correctly installed and
operational.
1. Remove the elastic band securing the pens to the steel pen lifter arm for despatch purposes.
2. The pen(s) operate freely, write clearly on the chart and pass each other without touching.
3. Measuring elements are correctly installed.
4. Measuring elements are indicating correctly. If not, refer to zero adjustment.
5. Ensure that, in case of instruments fitted with mechanical chart drive, it is running.
6. Fit a new chart with its edge under the guide clips, set it to the correct time line and clamp the
centre-fixing device.