Specifications

RotorWay International
Exec 162F Maintenance Manual
43
Section 17: Ballast Weight
The ballast weight and ballast weight transport system was designed to keep the helicopter within its operating limitations
during solo and dual flight configurations.
Reference print: E22-2000
NOTE: For proper location of the ballast weight, refer to the Flight Manual.
SERVICE NOTES:
1. CAUTION: All weldments should be inspected thoroughly. If a weldment fails and causes the ballast weight to depart
the ship during flight, the weight and balance of the helicopter could move outside the operating limitations.
INSPECTION CHART
PART NO.
E22-9000 Support Tube Weldment 100 HR 2000 HR/OC 17-1
E22-9010 Mount Tube Weldment 100 HR 2000 HR/OC 17-1
E22-9020 Ballast Weight Tube 100 HR 2000 HR/OC 17-1
E22-9030 Ballast Weight Pin 100 HR 2000 HR/OC 17-1
E22-4120 Safety Clip 25 HR 100 HR
DESCRIPTION
SERVICE
REFERENCE
INSPECTION
INTERVAL
R.C.O.