Specifications

RotorWay International
Exec 162F Maintenance Manual
B. Care should be taken so that the windscreen screws are not over tightened (see “Working With Plexiglass” in the
Standard Construction Procedures of the Construction Manual). This could cause stress cracks that may result in
a major crack down or across the windscreen. If a stress crack appears, stop drill the crack with the appropriate
size drill bit.
C. If a cover is used while trailering, make sure the cover has a soft inside lining and fits tight enough to the body to
avoid flapping.
3. Use any commercially available upholstery cleaner on the seats or cabin interior if they become soiled. Carefully read
the instructions on the cleaner to obtain desirable results. This will help prevent any shrinkage from occurring.
4. Check to make sure that the skid pants do not chafe against the body tub or the landing gear. If contact is present, file
the fiberglass to make clearance between the two parts.
12