RotorBits making Multi-rotor Frame design easy TriCopter Frame
This Tricopter frame is designed for users with an existing knowledge of how to set up a multi-copter with flight control and power hardware. Frame Engine centres: 555 mm Height: 155 mm Weight: 258 g Suggested Hardware Motor: 3 x Turnigy DST-1200 Brushless Bell Motor 1200kv ESC: 3 x Turnigy Mutistar 20A Props: 3 x 10 x 4.5 inch (2CW & 1CCW) Controller: Hobbyking Multi-Rotor KK2.1 Control Board (X configuration) 1500-2200mAh 3S 11.
x Carbon spars, 3 x landing legs, 3 x landing feet, 3 x leg mounts 1 x Center mount 2 x DST engine mounts 1 x Servo engine mount 1 x bag of assembly fasteners & zip ties
Assembly HEX Assembly QUAD ARMS (Alum, TRI Servo Mount Wood, Carbon) ASM 51415 51416 50443/47625 49693 Frame Mount 60 Frame Mount 45 Frame Mount 90 Frame Mount 120 49698 49702 49706 49710 Motor Mount Motor Mount Y Motor Mount Y Motor Mount DST1200 Universal DST1200 Universal 49671 49675 49663 49667 Frame Connector Foot HEX QUAD 49679 49659 49651 T 49687
