User Manual

This Hex frame is designed for users with an existing
knowledge of how to set up a multi-copter with flight
control and power hardware.
Frame
Engine centres: 720 mm
Height: 155 mm
Weight: 360 g
Suggested Hardware
Motor: 6 x Turnigy DST-1200 Brushless Bell Motor 1200kv
ESC: 6 x Turnigy Mutistar 20A
Props: 6 pcs x 10 x 4.5 inch (3CW & 3CCW)
Controller: Hobbyking Multi-Rotor KK2.1 Control Board
(X configuration)
1500-2200mAh 3S 11.1V LiPo Battery