User's Manual

40 Cranks installation
2. . SPACER VERIFICATION FOR CRANKS3 2. ROAD
To correctly use your crankset appropriate spacers for yourROTOR , it is necessary to select the
frame.
NOT :E if different bearings are used, spacing may differ.
Select your road frame and spacers from the table below:
Read your bottom bracket manual to verify compatibility with your frame.
Manual_ _ES_EN2INpower
Frame
Cuadro
Type A: 2.1 mm
Type B: 6.1 mm
Type C: 8.6 mm
Type D: 11.3 mm
Type E: 0.5 mm
Type F: 3.0 mm
Type A: 2.1 mm
Type B: 6.1 mm
Type C: 8.6 mm
Type D: 11.3 mm
Type E: 0.5 mm
Type F: 3.0 mm
Compatible BB
Pedalier
compatible
BB86 86,5 mm 41 mm
X X
Press Fit 4130
BB30 - 68 68 mm 42 mm
X X X X
BB30
X X X X
Press Fit 4630
X X
UBB PF30
X X X
Press Fit 4630
X X
UBB BBright
X X X X
Press Fit 4630
X X X
UBB 386
BSA 68 mm BSA Thread
X X
BSA30
ITA 70 mm ITA Thread
X X
BSA30
PF30 - 68 68 mm 46 mm
PF30 - BBright 79 mm 46 mm
BB386 86 mm 46 mm
NDS - L DS - R
W
D
NDs - L: Non-Drive side - Left; Ds - R: Drive side - Right