User's Manual

39Spider and cranks installation
ES
EN
2.3.1. SPACER VERIFICATION FOR MTB CRANKS
To correctly use your crankset appropriate spacers for yourROTOR , it is necessary to select the
frame.
Read your bottom bracket manual to verify compatibility with your frame.
Nds - L: Non-Drive side - Left; Ds - R: Drive side - Right; Asym: Asymmetric; Sym: Symmetric
Manual_ _ES_EN2INpower
Select your frame and spacers from the below:MTB table
Width (mm) WR (mm) Inner diam (mm)
48.5 Asym X
47.25 Asym X X X
BB89 89,5 44.75 Sym 41 X X X X PF4130
39 Asym X X
37.75 Asym X X X X
36.5 Sym X X X
39 Asym X X
37.75 Asym X X X X
36.5 Sym X X X
BSA - 68 68 34 Sym BSA Thread X X X BSA30
PF30 - 68 68 34 Sym 46
X X X
UBB PF30
PF30 - A83 83 Asym 46
X X X X X
PF30
PF4130
BSA30
UBB PF30
Compatible BB
Pedalier
compatible
Type F: 3.0 mm
Type D: 11.3 mm
Type E: 0.5 mm Type A: 2.1 mm
Type B: 6.1 mm
Type C: 8.6 mm
Type D: 11.3 mm
Type E: 0.5 mm
Type F: 3.0 mm
Type A: 2.1 mm
PF30 - 73 73 46
Type B: 6.1 mm
Type C: 8.6 mm
BSA - 73 73 BSA Thread
BB92 92 41
Frame
Cuadro
NDS - L DS - R
D
W
W
R
NOTE: if different bearings are used, spacing may differ.