User guide

8
Rotolight Stealth RL48/RL48-A User Guide
9
www.rotolight.com
9
3 .1 How to mount RotoLight on to an Accessory Shoe
a) Using the optional Rotolight Stand, t the
accessory shoe to 1/4” thread adapter to
the accessory or ‘hot’ shoe on your cam-
era. Tighten the lower thread of the shoe
adapter down onto the shoe so it doesn’t
slip.
(please note that Sony/Minolta DSLR’s use a non standard
shoe and an adapter is required)
b) Attach the Support arm to the shoe
adapter use at least 5 turns, then secure
facing forward by tightening the upper
thread tensioner of the shoe adapter. You
can insert an optional swivel adapter be-
tween the shoe adapter and the support
arm for 360 degree positioning.
c) Put the red Logo Boss assembly through
the centrehole of the Rotolight and clip
the legs into the holes of the support arm.
d) To release Rotolight gently squeeze the
legs together at the rear of the support
arm whilst holding the Rotolight and
Logo boss assembly (take care not to let
the Logo Boss pop out of the front hole ).