User guide

4
Rotolight Stealth RL48/RL48-A User Guide
5
www.rotolight.com
5
1 How to t or remove the Filter Holder
3) Finally squeeze the lterholder evenly
round the edge for a nice rm snug t.
To remove the lter holder place your
thumb in the middle of the front face of
the Rotolight (near the switch), and use
your other ngers to lift the outer edge of
the lterholder away from the face of the
Rotolight.
2) To x the lter holder on your Rotolight
hold the lter holder in your left hand
with open side facing upwards and push
the Rotolight (face down) into the centre
of the lter holder. (it is a ‘push to t’ de-
vice)
1) This is the Filter Holder. It will hold any
combination of the supplied ‘Lee lters’
ringlters to colour calibrate, dim or dif-
fuse your Rotolight. Refer to the cali-
bration chart to select the closest lter
combination that matches your ambient
lighting environment. e.g. for 5600K (stu-
dio daylight) use a 223 lter