User's Manual

Rotate the left knob to set the desired modelling light level in order to preview focus, shadows and highlights on

your subject (in %, 0-100%) and compose your photograph.

NB: Titan™ is intentionally less bright whilst in modelling light mode than regular continuous light mode, in order

to make the light more comfortable for the subject and prolong battery life.

Press, hold and rotate the left knob to set the desired ‘colour temperature’ for your ﬂash (in kelvin, range

3000K-10000K). Or, touch the colour temperature box, then adjust with the left knob. NOTE : If you are shooting

using an RGBW colour or ﬁlter, then this control is ignored (it only works if you are using a CCT colour)

Rotate the centre knob to set the ﬂash output power,

‘MAX+’ (>200% of maximum continuous output plus RGB), (RECOMMENDED)

‘MAX’ (=100% of maximum continuous output)

‘1/2’ (=50%),

‘1/4’ (=25%),

‘X8’ (modelling light level x 8)

‘X4’ (modelling light level x 4).

Using the X4 or X8 output allows you to use the modelling light on your Titan™ to compose and balance the lights

in a multi-light setup, and when they ﬂash they will keep this relationship but be four or eight times brighter.

Press, hold and rotate (or touch and adjust) the right knob to set the desired SmartSoft™ diffuser setting.

Rotate the right knob to set the desired duration for the ﬂash, in shutter intervals, i.e. 1/50s, 1/60s, 1/80s, 1/100s…up

to 1/2500s (‘1/2K5’).

Recommended ﬂash settings for simple one-light Titan™ ﬂash operation:

Set ﬂash power to MAX +

For HSS set ﬂash duration to 1/50th (any faster shutter speed i.e. 1/100th will be automatically captured) this

ensures that the image will be lit for the entire duration of the ﬂash/shutter event.

Set colour temp (kelvin) to midpoint (approx. 4200K – for maximum output), or carefully match the colour

temperature to the ambient light colour in the background of your image.

NB- We strongly recommend to leave the duration set to 1/50th and in HSS mode Titan™ will automatically adjust

the duration for you if it detects overlapping ﬂash events.