User's Manual

HOW TO ATTACH THE BATTERY ADAPTOR

STEP 1

Mount the battery adapter to

the Titan clamp by aligning the

hexagonal pin on the adapter with

the corresponding hole on the

clamp.

STEP 2

Slide the batteries into the

mounting positions on each side of

the adapter

STEP 3

Connect the adapter to the Titan

using the DC cable.

USING TITAN ON BATTERY POWER

To use the Titan on battery power, use the Rotolight 2-way or 4-way adapters; we do not recommend third-

party adapters. Please note that these adapters support 14.8V batteries, DO NOT use 24V batteries as it may

cause the adapter and Titan to sustain damage. A full range of recommended batteries including 95Wh,

155Wh and 310Wh batteries are available from rotolight.com (see page 48)