User's Manual

11
HOW TO ATTACH THE YOKE MOUNT
STEP 1
Align the yoke with the mounting
points on the side of the Titan
STEP 2
Secure using bolts and included
Allen key.
STEP 3
The Yoke can then be mounted
onto a lighting stand. We
recommend using a C-Stand with
sandbags.
HOW TO ATTACH THE SWAN NECK
STEP 1
Align the pins on the swan neck
with the matching holes on the rear
plate of the Titan.
STEP 2
Rotate the swan neck clockwise
until it clicks into place. Use the
tension knob to adjust angle and
position as required, taking care to
support the weight of the unit when
making any adjustments.
STEP 3
To remove, firstly get a good hold
of the Lighting fixture, then pull the
quick release knob….etc. The Fixture
will become loose rather quickly, so
take care not to drop it.
Recommended stand: The Titan X1 is compatible with RL-LIGHTSTAND as well as c-stands, whilst the Titan X2 requires a Junior
to Baby adapter (RL-CSTAND-J2B) if mounting onto a c-stand 16mm Baby spigot. We recommend using a sandbag to provide
additional support.
The Titan X1 can either be mounted onto a 16mm Baby Spigot, or , by removing the tensioner , The 16mm TVMP socket becomes a
28mm Junior stud. Titan X2 is equipped with a 28mm Junior stud. Rotolight also sell a 28mm Junior socket to 16mm Baby stud
adapter, available from our accessories page.