User's Manual

10
STEP 5
Connect your Titan to power, but
make sure the unit is turned off
STEP 6
Insert the USB stick to the unit
STEP 4
Once on the stick, rename the file
to 'update.bin'
STEP 8
Keep the knobs held down for
around 15 seconds until you see
the Flash icon specifically light up,
(you will see other icons light up
first), and once Flash icon lights
up, you can release the buttons
STEP 9
The light will start a firmware
update process, let it complete.
Do not turn the power off whilst
this is underway.
Once complete reboot your light
STEP 7
Hold down both the left and right
knobs and, keeping the knobs
held down, turn on the power.
HOW TO UPDATE TITAN™
VIA USB PEN DRIVE
Updating: Don’t turn off
50%
Troubleshooting: If you have any problems, try a different USB Stick, and ensure the le is named correctly.
X
STEP 2
Format the USB Stick to FAT32
format and have no other files on
the stick
STEP 3
Copy and paste the update file to
the USB Stick
STEP 1
Choose a USB stick
(preferably San Disk or reputable
brand), (not compatible with USB
3.0, needs to be USB 2.0 or earlier)
update.bin
FAT32