User Manual

Page 13
Troubleshooting
I have attached a battery but the unit does not power up ?
Check that the power switch is set to ‘BATT’ and not ‘OFF’ or ‘DC IN’.
I have attached the AC to DC Adapter but the unit does not power up ?
Check that the power switch is set to ‘DC IN’ and not ‘OFF’ or ‘BATT’.
I want to use an Anton Bauer battery with my ANOVA, how does it t ?
You need to get an Anton Bauer QR-A200 adapter plate, available from your dealer
or the Rotolight online store.
My ANOVA has powered up but when I try to adjust the brightness or colour
using the encoder knob, nothing changes?
The CNTL (control) needs to be set to –locl (local), not DMX or WIFI.
When I try to connect to my ANOVA via WIFI from my iPhone it does not work?
Firstly you need to download the Magic Eye APP from the iTunes APP Store (sold
separately) , then to connect, go to settings – wi, select the ‘ANOVA’ from the list
of available wi sources, if it does not ask you for a password, then press the right
arrow > and ‘forget this network’. Reselect the ANOVA from the list of wi sources,
then enter the password when prompted, the factory default is ‘01AAA’.
This problem is caused by the iPhone remembering old passwords for networks that
no longer exist.
I have forgotten the pin/password for my ANOVA?
You can either press the PIN button and this will reveal the PIN code that has been
set one letter at a time, or alternatively you can RESET the ANOVA back to factory
default by powering it up , holding down the encoder switch (it will say DIST
(Distributor) and ask you yes or no for the RESET command) – all variables will be set
back to factory default including the PIN which will be ‘01AAA’.
I have set a PIN of ‘3XYZ’, what is my password and which ANOVA network
should I select on my iPhone?
The password on your phone will be ‘03XYZ’, the network will appear as “ANOVA 3”
on the list of available networks.
I used a standard photographic colorimeter to check the colour of light on my
ANOVA and it did not seem to give me a sensible reading.
Most colorimeters are not designed to accurately measure the light colour from
LED’s , The ANOVAs are all calibrated using a Konica Minolta CL-200A colorimeter
which is specially designed to accurately measure LED light sources.
6
Anova_User_Guide.indd 13 04/05/2012 14:03