User Manual

(‘COL’) COLOUR
You can adjust and accurately display the Colour
Temperature (CCT) of NEO by rotating the right control
knob. If you rotate the knob quickly it will speed up the
data input. You can press and rotate to deliberately adjust
the colour in steps of 100kevin (Fast Mode). Simply
rotating the knob will adjust the brightness in steps of 10
kelvin.
NEO has a Colour Temperature Range of 3150 kelvin
(Tungsten) up to 6300 kelvin (direct daylight).
NEO has a special technology called ‘Dynamic Drift
Stabilisation’ which maintains the colour temperature
through the entire dimming range.
RESET
You can reset all the user parameters in NEO’s non-
volatile memory by holding down one of the red control
switches whilst simultaneously powering NEO ON.
The word ‘ZERO’ will be displayed, select Y for yes (reset
all data), or N for NO.
DISPLAY
LEFT KNOB/SWITCH
RIGHT KNOB/SWITCH
DC POWER SWITCH
DC INPUT (6v-18v)
BATTERY COMPARTMENT 6xAA
TRIPOD MOUNT
- 05 -