User Manual

(‘VERS’) FIRMWARE VERSION
Click the left switch to display the rmware version
installed in your NEO.
(NB The rmware can be updated if required by your
Rotolight Distributor via the update port in the battery
compartment)
Click the left switch to return to MENU, alternatively you
can return to the basic operation (BRI / COL) by pressing
both control switches together.
FILTER INFORMATION
NEO’s Filters are 130mm diameter and have a 40mm hole
in the centre, so it is easy to cut your own.
A lter holder is included with NEO. This simply rotates
into a locking position of the front cover the NEO light.
You will nd that the lter holder will be tighter one way
round from the other, this is to allow for multiple lters to
be used together (i.e. Diffuser plus Colour FX), so position
the lter holder whichever way best suits your use , to
accommodate your lter setup.
NEO ships with a standard lter pack consisting of :-
216 Full Diffuser
250 Half Diffuser
184 ‘Cosmetic Peach’
(Cosmetic diffuser for softer skin tones)
279 1/8th Magenta (or Minus Green)
There is an optional add on ’Colour Filter Pack’ which
is highly recommended for use in conjunction with
CineSFX™ mode, consisting of 10 Colour FX Filters, the
rst ve (255, 791, 103, 162, 061) have been recommended
by Visual FX Veteran and DOP Stefan Lange:-
255 ‘Hollywood Frost’
(Soft gentle Diffuser with minimal light loss)
791 ‘Moroccan Frost’
(warm Cosmetic Diffuser for darker skin tones)
103 Straw
(Light sunshine FX, or subtle Fill/Hair Light FX)
162 ‘Bastard Amber’
(warm very popular amber lter.eg sunshine)
061 ‘Mist Blue’
(great for moonlight FX)
- 14 -