User Manual

Click the right switch to activate the ‘Fire’ effect
Rotate either the right knob to adjust the ‘Fire’ effect
frequency
(It will display XX hz which is an indication of the effect
frequency – around 45hz is nice for a ‘campre’)
Rotate either the left knob to adjust the ‘Fire’ effect depth
threshold (about 25% is nice for a ‘campre’)
(It will display XX % which is an indication of the effect
depth)
Inside the re effect there is a switcheable parameter
called ‘ColourSwing BLUE’ which emulates the colour
transition of ames going up the chimney (i.e. from yellow
to blue) to activate this parameter click the right button.
To deactivate ‘Colour Swing BLUE’ click the right knob
again and ‘MONO’ (Monochrome) will be displayed.
(NB: the Fire parameters are stored in non volatile
memory)
The re effect can be enhanced with a warm colour lter
included within the optional Add on Colour FX Pack (RL-
NEO-CFP) available from your dealer or www.Rotolight.
com (‘777’ ‘Rust’ is recommended for best impact, ‘182’
Light Red also works well, or an Amber, CT Straw or CTO
lter).
(‘Plce’) POLICE
This effect is an emulation of an emergency services light – it
works best by adding the 712 Bedford Blue Filter Gel included
within the optional Add on Colour FX Pack.
Click the right switch to activate the Police effect
Rotate either the left or right knob to adjust the Police
beacon speed
(It will display XX hz , which will give you an indication of
the effect speed)
(NB: the Police parameters are stored in non volatile
memory). Click the left switch to exit the Police effect and
return to SFX Menu.
- 12 -