User Manual

(‘SFX’) CINEMATIC SPECIAL EFFECTS (CineSFX™)
Click the Right switch to enter ‘SFX’
Rotating the left knob cycles through the available ‘SFX’:-
‘Strb’ - ‘Ltng’ - ‘Thrb’ - ‘Cycl’ - ‘Fire’ - ‘Plce’ - ‘TV’
You can activate your selected SFX function by clicking the
right switch
You can leave the selected function by clicking the left
switch, alternatively you can return to the basic operation
mode (BRI /COL) at any time by pressing both switches
together at the same time.
(‘Strb’) STROBE
The Strobe effect produces a regular ashing light, you can
control the speed
Click the right switch to activate the strobe effect
Rotate the right knob to adjust the strobe speed
(It will display XX hz , where= ‘XX’ = number of strobe
cycles per second) The strobe range is from 1hz up to 4hz.
(NB: the last used strobe parameters are stored in non
volatile memory). Rotate the left knob to adjust the ‘duty
cycle’ (ash duration) to eliminate any issues with rolling
shutter cameras. Click the left switch to exit the Strobe
Menu and return to SFX Menu.
(‘Ltng’) LIGHTNING
The lightning effect simulates real lightning, it is a random effect
but you can control the speed at which the lightning bursts
re-occur, ideally you would set the brightness (BRI) to 100% and
the colour (COL) temperature to 6000k
Click the right switch to activate the lightining effect
Rotate the right knob to adjust the lightining speed.
(It will display XX hz which is an indication of the effect
frequency)The lighting range is from 1hz up to 50hz.
Click the right switch to arm the effect and fade to black,
‘Trig’ will be displayed - re-Click the right switch to trigger
the effect. Rotate the left knob to adjust the ‘duty cycle’
(ash duration) to eliminate any issues with rolling shutter
cameras. (NB: the last used lightning parameters are stored
- 10 -