User Manual

BATTERIES

NEO 2 does not include a battery as standard. NEO 2 will operate from 6

x AA lithium or NiMH rechargeable batteries, or any third party “V-mount”

battery with a DC voltage of 7 volts up to 18 volts and a D-TAP Port and

D-TAP DC Cable.

Recommended batteries:

DO NOT USE STANDARD ALKALINE BATTERIES WITH NEO2, AS IT NEEDS

HIGH PERFORMANCE BATTERIES (Lithium or NiMH AA’s)

For best results use Rotolight ‘LiONHEART’ rechargeable (NiMH) AA

Batteries, which will provide 1.5 hours continuous light output at 100%

power, or 85,000 full power ﬂashes. As with any electronic device, do NOT

mix brands of batteries inside NEO 2 and ensure all batteries have a similar

level of charge to avoid overstressing the battery which could lead to the

risk of damage to the battery and NEO 2. Alternatively, use the Rotolight

(RL-BATT-95) Lithium-ion v-Lock Battery (available from www.rotolight.

com) for 6 hours run time, and MAX + ﬂash mode.

The Rotolight V-Lock is also available with a bundled D-TAP wall charger

(110/220volt), 2 way battery charger or 4 way battery charger.

WARNING: Take care to use recommended batteries in your NEO 2. If

the batteries you are using get hot then use the supplied mains adapter

instead.

Recommended

Batteries Rotolight

Lionheart AA by

Powerex Pro

Available from