User Manual

(‘TEMP’) TEMPERATURE
Click the left switch to display the internal operating
Temperature of NEO 2. NB: if NEO 2 detects the
battery temperature rising to 58 degrees or above,
it will display ‘Too Hot’ (touch any knob to clear
message) and automatically cut the output down
to 25% to prevent overheating.
(Please use only quality battery systems with NEO
2, such as the Rotolight LionHeart 95mWh V-Lock,
which will drive the light at full continuous power
for up to 3 hours).
Click the left switch to return to MENU, alternatively
you can return to the basic operation (BRI / COL)
by pressing both control switches together.
(‘VERS’) FIRMWARE VERSION
Click the left switch to display the firmware version
installed in your NEO 2.
(NB: The firmware can be updated if required by
your Rotolight Distributor via the update port on
the back of NEO 2)
Click the left switch to return to MENU, alternatively
you can return to the basic operation (BRI / COL)
by pressing both control switches together.
(‘DEMO’) DEMO MODE
(Use this to let NEO 2 automatically demonstrate
a selection of its unique capabilities, mainly useful
for retail stores).
Set a desired brightness and base colour
temperature using ‘BRI / COL’.
Enter MENU then navigate to ‘DEMO’ by rotating
the left knob.
Select ‘DEMO’ by clicking the right knob.
NEO 2 will now demonstrate a range of effects
from its library, whilst simultaNEO 2usly explaining
what is being demoed on the red display.
Click the left switch to return to MENU, alternatively
you can return to the basic operation (BRI / COL)
by pressing both control switches together.
39