User Manual

(‘Neon’) NEON
This effect is used to simulate a faulty NEON
fixture. To enter the effect click the right switch. Use
the right switch to start/stop the effect, alternatively
use the sync/tigger input port to externally start/
stop the effect.
The right rotary encoder controls the flicker speed
of this effect.
To exit the effect press the left switch. To exit to BRI/
COL operation press both right and left switches
together.
(‘Film’) FILM
The ‘Film’ SFX effect is designed to simulate the
light coming from a celluloid film projector in a
movie theatre. To enter the effect click the right
switch. You can start stop the effect using the right
switch or an external trigger from the Flash Sync
and Trigger port. The right rotary control changes
the speed of the movement on the screen. The left
rotary control changes the the speed of the flicker
frames emulating the sprocket fed film.
To exit this effect press the left switch, to exit back to
basic (BRI/COL) operation press both left and right
switches together.
(‘Weld’) WELD
This effect simulates the light from an electric arc
welding torch.
To enter the effect press the right switch. The right
rotary control varies the speed of the effect.  The
right switch starts / stops the effect, or you can also
start/stop the effect via the external trigger port .
A key characteristic of the arc welding process is
the electric blue arc flame and the orange sparks,
you can use the left rotary control to set the balance
between the two components of this effect.
To exit the effect press the left switch, or to exit back
to basic BRI/COL operation press both switches
together.
FILM
WELD
NEON
32