User Manual

(‘TV’) TELEVISION
This effect is an emulation of someone watching a
TV show – it works best by setting the ‘COL’ colour
to around 6000kelvin to emulate the light from a
cathode ray tube.
Click the right switch to activate the TV effect.
Rotate either the left or right knob to adjust the TV
effect speed (It will display XX hz , which will give
you an indication of the effect speed).
Click the right switch to pause the effect / fade to
black - ‘Trig’ will be displayed - re-click the right
switch again to Trigger the effect. (you can also use
an external flash trigger to trigger the TV effect, just
connect this to the ‘FLASH’ sync port on the rear of
NEO 2)
(NB: the TV parameters are stored in non volatile
memory). Click the left switch to exit the TV effect
and return to SFX Menu.
Click the left switch to return to MENU, alternatively
you can return to the basic operation (BRI / COL) by
pressing both control switches together.
(‘Shot’) SHOT
This effect simulates the light produced when a
gun is fired.
Enter the effect by pressing the right switch. Trigger
the effect by pressing the right switch , or trigger
the effect externally via the Trigger Port. Control the
decay time of the gunshot using the right rotary
control.  Use the left rotary control to control the
‘colour swing’ of the fire coming from the muzzle,
I.e. Rotate right (clockwise) to set a blue to orange
value, or rotate left (anti-clockwise) to select an
orange to blue value
To exit the effect , press the left button, or to exit back
to basic BRI/COL operation press both switches.
-TV-
SHOT
29