User Manual

(It will display XX % which is an indication of the
effect depth).
Inside the fire effect there is a switchable parameter
called ‘ColourSwing BLUE’ which emulates the
colour transition of flames going up the chimney
(i.e. from yellow to blue), to activate this parameter
click the right button (‘BLUE’ is displayed).
To deactivate ‘Colour Swing BLUE’ click the right
knob again and ‘MONO’ (Monochrome) will be
displayed.
(NB: the Fire parameters are stored in non volatile
memory)
The fire effect can be enhanced with a warm
colour filter included within the optional add on
Colour FX Pack (RL-NEO 2-CFP) available from
your dealer or www.Rotolight.com (‘205’ LED CTO
is recommended for best impact, ‘182’ Light Red
also works well, or an Amber, CT Straw or other CTO
filter).
(‘Plce’) POLICE
This effect is an emulation of an emergency services
light – it works best by adding the 712 Bedford Blue,
or ‘182’ Light Red Filter Gel included within the
optional Add On Colour FX Pack.
Click the right switch to activate the Police effect
Rotate either the left or right knob to adjust the
Police beacon speed
(It will display XX hz , which will give you an
indication of the effect speed)
(NB: the Police parameters are stored in non volatile
memory). Click the left switch to exit the Police
effect and return to SFX Menu.
TV SIMULATION
LIGHTNING
FIRE
PLCE
28