User Manual

WARNING - HEALTH HAZARD – USE STROBE WITH

CAUTION: CineSFX™ mode uses Strobe Lighting effects

that may pose a risk to those at risk of photosensitive

seizures/ epilepsy. Manufacturer accepts no liability

or responsibility for misuse of this product. You should

take all precautions to pre-warn and ensure the safety of

those who may come into contact with the product. If

you or any of your relatives have a history of seizures or

epilepsy, consult a doctor before using. If you feel unwell

from using these effects, immediately discontinue use

and consult a doctor. If strobe lighting is to be used in

a production, warnings should be posted at the front of

house or entrance doors to the set/theater as well as in

a video or program, if distributed. Example: “WARNING:

Strobe lights are used during this performance”.

This product is not suitable for use by children of any age

and is designed for professional use only.

(‘SFX’) CINEMATIC SPECIAL EFFECTS (CineSFX™)

Click the Right switch to enter ‘SFX’

Rotating the left knob cycles through the available

‘SFX’:-‘Strb’ - ‘Ltng’ - ‘Thrb’ - ‘Cycl’ - ‘Fire’ - ‘Plce’ - ‘TV’

You can activate your selected SFX function by

clicking the Right switch

You can leave the selected function by clicking the

left switch, alternatively you can return to the basic

operation mode (BRI /COL) at any time by pressing

both switches together at the same time.

(‘Strb’) STROBE

The Strobe effect produces a regular ﬂashing light,

you can control the speed

Click the right switch to activate the strobe effect,

Rotate the right knob to adjust the strobe speed

(It will display XX hz , where= ‘XX’ = number of strobe

cycles per second). The strobe range is from 0.3hz

up to 7hz. (NB: the last used strobe parameters

are stored in non volatile memory). Rotate the left

knob to adjust the ‘duty cycle’ (ﬂash duration) to

SFX

STRB