User Manual

and use the wheel to control NEO Colour
On the Rotolight/Elinchrom Transmitter press the
first ‘soft key’ (PWR) and use the wheel to control
NEO Brightness on all lights connected on that
Channel and group.
To enter flash mode, on the Rotolight/Elinchrom
Transmitter press the Test key (Elinchrom Logo Key)
, (‘MENU’ …then ‘FLSH’ will be displayed) , Press the
Test key again to enter Flash mode.
To Test the Flash, press the Test key (Elinchrom
Logo)
To change the flash power settings press the second
‘soft key’ (MOD) and flash power setting will be
displayed on the NEO2. Rotate the rotary control
to change the setting.
In Flash mode, press (PWR) and use the encoder to
change the Modelling light brightness
In Flash mode, press (MOD+) and use the encoder
to change the Flash and modelling light colour
temperature (3150-6300)
To exit flash mode, press (MOD) and rotate the
encoder wheel to the left (anticlockwise), Neo will
flash briefly and return to (BRI/COL) mode.
NAVIGATING MENU MODE USING HS TRANSMITTER
REMOTE CONTROL
When you are in (BRI/COL) mode press the ‘Test
Button’ (Elinchrom Logo), (‘MENU’ then ‘FLSH’ is
displayed). Use the rotary encoder to select the
menu item you would like to control (‘FLSH’, ‘TRIG’,
‘DISP’, ‘FADE’, ‘SFX’, ‘FDIM’, ‘TECH’, ‘DEMO’).
Press the Test Button (Elinchrom Logo) to enter
the sub menu, e.g. ‘SFX’ then you can select menu
items using rotary encoder, and press the Test
Button once to select/trigger/pause etc.
NB: To exit and go back one step , press the test
button twice
NB: To exit ‘MENU’ and go back to (BRI/COL), press
the test button twice
If NEO 2 is in MENU mode, you can use the wheel
to scroll through the menu items, and use the
Elinchrom Logo button to enter or trigger a menu
22
PWR Button(control
Brightness of Neo 2)
Test Flash Key (Single
Click=right click,
Double click=left click
from Neo 2)
Encoder Wheel