User Manual

Recommended triggers :

(Compatible with Internal built in ﬂash receiver)

Rotolight HSS Transmitter (Canon Nikon Sony

Olympus Panasonic)

Elinchrom HS Transmitter Plus (Canon Nikon Sony

Olympus Panasonic, download latest ﬁrmware

from Elinchrom.com for Rotolight integration)

(Other HSS transmitters which will require a receiver

or transceiver connected to the Flash Sync Port on

NEO 2)

Godox X1T (use with the Godox X1R receiver)

Pixel King Pro - Sony, Canon, Nikon

Flashpoint R2

Phottix ODIN II (HSS) – Canon, Nikon, Sony

PocketWizard (HSS) : FlexTT5, and FlexTT6 support

High Speed Sync (HSS) for Canon and FP Sync for

Nikon.

Cactus VI II (HSS) : Fuji, Canon, Nikon, Pentax,

Olympus, Panasonic

To Exit Flash Mode

Click the left switch to return to MENU, alternatively

you can return to the basic operation (BRI / COL) by

pressing both control switches together.

(‘TRIG’) SETTING NEO2 TO USE THE BUILT IN

SKYPORT HSS RECEIVER

(2.4Ghz Wireless Flash Triggering Using the built-in

ElinChrom SKYPORT HSS Receiver)

NOTE : NEO 2 will default to Channel 1, group 1 (same

as the Rotolight HSS transmitter by Elinchrom),

with Skyport trigger turned ON. Therefore, to use

ﬂash, you do NOT need to access the TRIG menu

unless you wish to turn Skyport Off, or to change

the group or Channel.

Scroll to ‘TRIG’ , Click the right switch to enter ‘TRIG’

Rotate the left knob to scroll through ‘MODE’ , ‘GRP’,

‘FREQ’, ‘TEST’

Click the right switch to enter ‘MODE’

Rotate the right knob to change from ‘Off’ to ‘SKYP’

TRIG