User Manual

LOCK

Note: AEOS is always in 2-channel DMX mode (BRI/

COL), i.e the same as Anova PRO 2 ‘FxRx’ 2-channel

mode.

– (‘LOCK’) Settings Lock

Use ‘LOCK’ to isolate and protect a speciﬁc light

from changes being made by a master Anova PRO

2 running AUTO.

– (‘MODE’) What Controls AEOS

LOCL’ (the local knobs, trigger input and/or

Skyport) ‘DMX’ for wired DMX or ‘wDMX’ where the

AEOS is wirelessly controlled by Rotolight wDMX

(i.e. from an Anova PRO 2).

– (‘FREQ’) Frequency

Rotate the left knob to scroll to ‘FREQ’ (Skyport

channel). Click the right knob to enter ‘FREQ’

settings, rotate either knob to select your desired

channel (Ch 1-20) and click the right knob to set

and return.

– (‘SKYP’) Skyport

The AEOS will arrive with the Skyport already

activated AEOS will also still ﬂash in Skyport mode

from a wired external source connected to the

ﬂash sync 3.5mm jack port.

MODE = ELSP control modes on Skyport controller.

Within this sub-menu select ‘NORM’ (normal) for

use with other Elinchrom ﬂash units or ‘SPED’

(speed) for Rotolight only units. We recommend

SPED is selected for less data interference. ‘Off’ will

turn the internal Skyport receiver off.

(‘GRP’) Skyport Group

GRP = Skyport Group. Click the right knob to enter

‘GRP’ settings. Rotate either knob to select your

desired group (Gp 1-4). Click either knob to set and

return.

MODE

FREQ

SKYP

GRP