User Manual

knob to trigger the effect. Rotate the left knob to

adjust the maximum brightness of the lightning

effect. Hold and rotate the left knob to adjust

the minimum brightness of the lightning. Press

and hold the right knob to adjust the colour

temperature of the lightning.

The last used Lightning parameters are stored in

non-volatile memory.

Click the left control knob to exit the lightning

effect and return to SFX menu.

Note: the duration of the lightning ﬂashes is

20ms, which is the recommended duration for

cinematography. The lightning strikes come in

bursts of between 2 and 8 random length pulses).

(‘THRB’) Throb

Rotate the left knob to adjust the duration

between each throb from 0.1s-9.0s. Rotating

the right knob adjusts the speed of each throb

from 1 Hz to 50 Hz. Hold and rotate the right

knob to adjust the output of the minimum light

level. Hold and rotate the left knob to adjust the

maximum light level of the throb. To adjust the

colour temperature of the throb, press both knobs

together to exit, adjust the kelvin by rotating the

right knob and re-enter the SFX mode.

Note: the Throb parameters are stored in non-

volatile memory. Click the left knob to exit the

Throb effect and return to SFX menu.

(‘CYCL’) Cycle

Cycle is a regular smoothly pulsing light which

fades between the tungsten and blue LEDs.

Click the right knob to activate the effect.

Rotate either the left or right knob to adjust the

cycle effect frequency (it will display XX Hz. The

cycle range is from 1 Hz up to 50 Hz.

Note: the Cycle parameters are stored in non-

volatile memory. Click the left knob to exit the

cycle effect and return to SFX menu.

Thrb

Cycl