User's Manual

Table Of Contents
2.5.12.
2.5.13.
System Configuration Label: The System Configuration Label contains
information related to the settings of the unit within the system it operates. The
information displayed on this label may be considered semi-permanent.
Model, Serial Number, FCC ID, and IC Label: The information displayed in
this label is permanently assigned by the factory.
2.6. REMOTE SHOCK TUBE INITIATOR (RSTI)
2.6.1. Figure 2-6 shows the external features of the RSTI. The unit is sealed at the
manufacturer or service depot and should not be opened during field activity.
Figure 2-6 Remote Shock Tube Initiator (RSTI)
2.6.2. The RSTI operates similar to the Electric Remote Unit as described in Section
2.5, but initiates non-electric tubing instead of electric detonators. The RSTI develops
2,500V at the Shock Tube Tip Firing Terminals when firing.
1678 RFD OPERATION MANUAL {DRAFT}
16