User's Manual

1678 RFD OPERATION MANUAL 63
Next the RSTI begins the Arm/Fire Test. The Test Box Arms the RSTI and begins 5
second countdown.
At the end of the countdown, the RSTI fires resulting in the formation of a spark at the
tip. The firing voltage and pass level is shown.
Next the RSTI begins a Battery Test.
The Battery Test places a load on the battery and a countdown timer is started. At the
end of the test, the loaded battery voltage is displayed along with the test limit of (7.00).
After testing is complete, the following message is displayed.
Loaded Battery 7.24
<Low Battery = 7.00>
Battery Test – Standby
30
Battery Voltage 7.24
Firing Voltage 2652
Firing Voltage 2652
<Pass Level = 2250>
RSTI Arm/Fire Test
05