User's Manual

1678 RFD OPERATION MANUAL 51
7. BASIC TROUBLESHOOTING IN THE FIELD
7.1. REMOTE UNITS
7.1.1. ON and SAFE lights do not illuminate when the Antenna Assembly is
installed.
a) Check Antenna Assembly and make sure it is seated, “clicks” on to the connector.
b) Recharge the battery.
c) Try a different Antenna Assembly.
7.2. CONTROLLER
7.2.1. ON Light does not stay on.
a) Check Antenna Assembly and make sure it is seated, “clicks” on to the connector.
b) Press and hold the “ON” switch for 5 seconds.
c) Controller battery needs to be recharged.
7.2.2. Command receipt is not confirmed by Remote Unit.
a) Remote Unit is more than 1 mile from Controller.
b) If the Remote Unit is less than 1 mile away from the Controller:
Check for damage to Controller Antenna Assembly.
Try a different Antenna Assembly on the Controller.
Move at least 25 feet in any direction and try again.
Reposition the Remote Unit if:
The antenna is not positioned vertically.
The antenna is next to another radio antenna.
The antenna is surrounded by metallic objects.
Use optional magnetic mount antenna for improved gain. This antenna is
available by special order only.
7.3. REMOTE SHOCK TUBE INITIATOR
7.3.1. Unit will not ignite the shock tube.
a) The Shock Tube Tip may be worn or damaged. Replace tip.
b) The shock tube may be damaged from moisture. Try a fresh cut or replace the
tubing. Ensure the tube covers the entire needle. Ensure both the needle and
the shock tube lead-in is dry when mating.