User's Manual
1678 RFD OPERATION MANUAL 50
6. POST OPERATIONAL PROCEDURES
6.1. SECURING THE SYSTEM
6.1.1. Turn the Controller off and remove the Antenna Assembly. This action
disables the Controller.
6.1.2. Replace the dust cover on the antenna / battery charger connector on the
Controller and replace the plastic cap on the Antenna Assembly.
6.1.3. Remove the Antenna Assemblies from the Remote Units. This action turns
off the Remote Units.
6.1.4. Replace the dust cover on the antenna / battery charger connector on the
Remote Units and replace the plastic cap on the Antenna Assembly.
6.2. PHYSICAL INSPECTION
6.2.1. Inspect the Controller and Remote Units for physical damage.
6.2.2. Inspect the units for dirt or corrosion around/on connector pins and vent.
6.2.3. Replace any unit found to have damage. Return unit to manufacturer.
6.2.4. Clean units using a soft bristle brush.
6.2.5. If a unit cannot be cleaned by brushing, make sure the vent is closed
securely and wash units in warm soapy water.
6.2.6. Rinse units with clean water and dry thoroughly.
6.2.7. Inspect units for damage. Replace as necessary.
6.3. PACKAGING
6.3.1. Re-package all components in carrying case.
6.4. MAINTENANCE & EQUIPMENT STORAGE
6.4.1. Periodic battery charging
6.4.2. Check for signs of corrosion around and on connector pins.