User's Manual

1678 RFD OPERATION MANUAL 49
CAUTION Do not assume the DISARM command has been received by the Remote
Unit unless disarmed status is confirmed with a steady SAFE light for that Remote Unit
on the Controller display panel. If distance appears to be the problem, move closer to
the Remote Unit following standard procedures for this type of situation. The “STATUS”
and/or “DISARM” switches may be pressed repeatedly as the Remote Unit is
approached. Maintain a safe distance from the Remote Unit. Do not approach the
Remote Unit until disarmed status is confirmed with a steady SAFE light for that Remote
Unit on the Controller display panel. Under no conditions should the “FIRE” switch be
pressed as the Remote Unit is approached. DO NOT bring the Controller closer than
100 feet (30 meters) to blasting caps, wires connected to blasting caps, or other
explosives.
5.5.12. Turn off the Controller.
5.5.13. Recover the fielded Remote Units.
5.5.14. Refer to Post Operational Procedures in chapter 6.