User's Manual

1678 RFD OPERATION MANUAL 22
2.10. TEST BOX
2.10.1. Figure 2-12 provides a drawing of the Test Box. The Test Box is used to
display information from and to evaluate the performance of the Controller, Mini
Controller, Electric Remote Units and RSTIs. The Test Box can also be used to
change settings and parameters of the units with certain restrictions.
Figure 2-12 Test Box
2.10.2. Serial Communications Port: The Test Box can be connected to a USB
port on a host PC. The connection can be used to log the results of the tests
performed. The serial communications port is also used when performing parameter
changes.
2.10.3. Test Probe: The Test Probe connects to the antenna/charge connector on
the top of the Controller, Mini Controller, Electric Remote, or RSTI. Through the Test
Probe, the Test Box communicates with the test unit to read the various settings,
parameters, and to measure firing circuit and loaded battery voltages.