User's Manual

1678 RFD OPERATION MANUAL 19
2.8. 3 POSITION BATTERY CHARGER
2.8.1. Figure 2-10 shows the 3 Position Charger that is configured with some 1678
RFD systems. The 3 Position Charger is a basic NiMH charger which provides a 3 to
4 hour recharge for up to three RFD units (e.g. one Mini Controller and two Remotes).
It may be stored and used within the 1678 case/foam, or it can be stored and used as
a stand-alone device. The 3 Position Charger comes with an AC adapter that can be
configured for use internationally. The 3 Position Charges does not provide discharge
or battery conditioning functions; these features are only available with the 5 Position
Charger & Conditioner. The 3 Position Charger should be stored in a clean, dry place.
Figure 2-10 3 Position Charger