User's Manual

1678 RFD OPERATION MANUAL 16
2.6.12. System Configuration Label: The System Configuration Label contains
information related to the settings of the unit within the system it operates. The
information displayed on this label may be considered semi-permanent.
2.6.13. Model, Serial Number, FCC ID, and IC Label: The information displayed in
this label is permanently assigned by the factory.
2.7. REMOTE SHOCK TUBE INITIATOR (RSTI)
2.7.1. Figure 2-7 shows the external features of the RSTI. The unit is sealed at
the manufacturer or service depot and should not be opened during field activity.
Figure 2-7 Remote Shock Tube Initiator (RSTI)
2.7.2. The RSTI operates similar to the Electric Remote Unit as described in
Section 2.6, but initiates non-electric tubing instead of electric detonators. The RSTI
develops 2,500V at the Shock Tube Tip Firing Terminals when firing.