User's Manual
1678 RFD OPERATION MANUAL 15
Figure 2-6 Electric Remote Unit Angled View
2.6.9. Binding Posts: The Binding Posts located on top of the Electric Remote
Unit allow the firing cable to attach to the firing terminals. The insulation at the ends of
the firing cable must be removed prior to attachment. One at a time, depress the top of
the binding posts and insert a leg of the firing cable. Release the binding post, causing
it to grab the lead.
2.6.10. Manual Air Vent: A manual vent is located on top of the unit. The vent is
used to relieve any internal pressure that has accumulated within the unit as a result
of temperature or altitude. The vent is opened when charging to release any gasses or
pressures accumulated during charging. The vent is closed during normal use,
transport, or when the unit is exposed to moisture.
2.6.11. Battery Compartment: In the back of the unit is a compartment which
stores the rechargeable battery pack. The battery compartment is isolated from the
unit’s electronics.