User's Manual

1673 OPERATION MANUAL REV A

7. CONFIGURATION SOFTWARE INSTALLATION

7.1. 1673 RFD CONGURATION SOFTWARE

7.1.1. The programming software allows the user to view and change various settings within

the RFD units to best match the equipment to the blasting application. Many of the settings can

also be configured through the Advanced User menu directly. The programming software also

allows the user to upload the history event log, which stores a record of the last 1024 operation

events.

7.1. INSTALLING THE USB CABLE DRIVERS

7.1.1. Connect the USB cable from the 1673 Controller or Remote Unit to the USB port on

the PC.

7.1.2. If the automatic installation takes place there is no need to continue with the

procedure outlined below.

7.1.3. The USB drivers are available on the RFD USB thumb drive. Insert the USB thumb

drive provided. Browse the driver install program to the Rothenbuhler USB Drivers folder.

Complete the install process.

7.1.4. Press the Windows start button to bring up the start menu and right click on

‘Computer’.

7.1.5. Select ‘System Properties’.

7.1.6. Select ‘Manage’ and the ‘Computer Management’ window opens.

7.1.7. Expand the ‘Ports (COM & LPT)’ category.