User's Manual

1673 OPERATION MANUAL REV A
43
Figure 5-5 Program Remote Keys
5.8.2.8. Put in the key to be used as Remote #1 first. If the keys are labeled, ensure the Unit #s
on the labels match the Remote number you are programming. Then continue following the screen
instructions until all of the Remote keys are programmed.
5.8.2.9. Follow the screen instruction to put in the Controller’s key and Remove when
programming is complete.
5.8.2.10. Repeat procedures 5.8.2.1 through 5.8.2.9 until all the Systems that you have
determined have been programmed.
5.8.2.11. Test the RFD following the Preoperational Procedures of Section 3.