User's Manual

This message shows the Serial Number, Unit Type, Date of Manufacture, and
Firmware Version of the unit connected to the probe.
The Test Box will automatically step to the next message.
This message displays while the Test Box loads down the battery of the Unit
connected to the probe. This is done to get a more meaningful measurement of
the battery status.
The Test Box will automatically step to the next message.
This message shows the battery voltage for the unit connected to the probe while
the Test Box loads that battery. The Low Battery for the Unit is also displayed.
The Test Box will automatically step to the next message.
This message will be displayed until the
probe is removed from the unit being
tested.
To run the tests again, disconnect and then reconnect the probe to a unit to be
tested.
S/N 12345 Type 81
DOM 08/14/2000 Ver 1.0
Battery Test - Standby
Loaded Battery 12.26
Low Battery = 11.75
Testing Completed