User's Manual

The Test Box will automatically step to the next message.
The Test Box will arm and fire a Remote Unit connected to the probe. The two
leads from the probe must be connected to the Remote binding posts for the arm
voltage to be measured. The “015” is the amount of time remaining in the Arm /
Fire test. This number will count down to “000”. The Remote will then be fired.
The Test Box will automatically step to the next message.
This message show the actual armed voltage measured, and the minimum
armed voltage level that is normal.
The Test Box will automatically step to the next message.
This message displays while the Test Box loads down the battery of the unit
connected to the probe. This is done to get a more meaningful measurement of
the battery status.
The Test Box will automatically step to the next message.
Remote Arm/Fire Test
015
Armed Voltage 27.16
Pass Level = 26.00
Battery Test - Standby